Unbeatable plastic Wad for hunting and shooting
Pre-set fracture cup with four parts anchored to the Wad.
Unbeatable for its excellent ballistic performance.
*Warning:
the quantity of shots is just indicative. It depends, for example, on powder volume or on base wad's geometry so we strongly suggest you to try some samples in order to find the right quantity of shots you can load.
FOR RETRIEVED CASES OR CASES WITH INCREASED INNER DIAMETER
If the Wad is loose in the Case, the gas seal will still be assured.
This tolerance can be eliminated by using a taller Wad, so as to squash the tubular section when edging; this action widens the Wad base, thus enabling it to compensate for the larger inner Case diameter (see Seal Ac- tion picture).
CARTRIDGE CLOSING BY ROUND OR CRIMP EDGE
For content or case size needs, thanks to its central elasticity, “Super G” Wad enables to obtain (without any inconveniences and leaving ballistic data unchanged) all of the heights ranging from open to partially flattened damper (see pictures Nos. 2 and 3).
For crimp edging, we advise to use about 11 mm case, reckoned from the lead level to the case rim (see picture No. 4).
If the lead is lower, a taller Wad must be used.
MAIN FEATURES: